Credit Terms & Policies
Doing Business With Diamond Metals Distribution
CREDIT / OPEN ACCOUNT POLICY
All first-time orders with new customers are required to pay by credit card or cash in advance.
Customers wishing to do business with Diamond Metals Distribution on an open account basis are required to complete and return a Credit Application. After a review of the credit application and approval, the customer will be able to place orders on open account. All open accounts are subject to periodic review of both credit status and limit. Diamond Metals reserves the right to deny credit and/or revoke credit for any customer without notice for reasons of credit risk and payment performance.
PAYMENT TERMS
Diamond Metals’ standard payment terms are Net 30 Days.
CREDIT APPLICATION
Download the Credit Application and return it to Diamond Metals’ Credit Department.
Completed applications may be returned along with a W-9 and Tax Exempt Certificate as follows:
By Fax:
(216) 898-7901 Attn: Credit Department
By Email:
creditdept@diamondmetals.com
By Mail:
Attn: Credit Department
Diamond Metals Distribution
4635 West 160th Street
Cleveland, OH 44135
Our Capabilities At A Glance
Saw Cutting
We cut all the steel we sell. Plates up to 40” of thickness and rounds up to 30 inches in diameter.
Flame Cutting
Up to 8″ in thickness with CAD capabilities.
Grinding
Up to 84″ cross-corner.
Milling
Duplex Milling up to 39″ wide by 39" long.
Pre-Squared Finishing
- Diamond-Cut 6-Side Pre-Squared Blocks: All surfaces finished .015 to .020 over the dimensions on the bill of materials
- Standard 6-Side Pre-Squared Blocks: Edges and ends squared to .015 to .020 over the dimensions on the bill of materials
- Thickness will be standard plate tolerances of .015 to .035 oversize
- Non-standard thickness can be machined at the customer’s request
- Special Pre-Squared Blocks: Blocks will be pre-squared to customer’s required tolerances