Pre-Squared Finishing

Diamond Metals offers the following Pre-Squared Services:
 

DIAMOND CUT 6-SIDE Pre-Squared Blocks

  • All surfaces finished .015 to .020 over the dimensions on the bill of materials

STANDARD 6-SIDE Pre-Squared Blocks

  • Edges and ends squared to .015 to .020 over the dimensions on the bill of materials
  • Thickness will be standard plate tolerances of .015 to .035 oversize
  • Non-standard thickness can be machined at customer’s request

SPECIAL Pre-Squared Blocks

  • Blocks will be pre-squared to customer’s required tolerances

 

Diamond's state-of-the-art equipment accurately pre-squares all blocks

 

Our Diamond Cut 6-side pre-squaring finsihes blocks to .015 to .020 over finished dimensions